You have no items in your shopping cart.
Close
Search
Filters

Casella LL 120/500 Hard Hose Irrigator

SKU: LL-120/500
Delivery date: 2-3 business days
Manufacturer: Casella

New generation ENGINE drive hard hose traveling irrigator. Do not waste your energy for operating a big irrigation machine. High volume & range, the most efficient irrigator in the market!

Hose Length
:
500 m
Hose Diameter
:
120 mm
Hose Thickness
:
11 mm
Working Pressure
:
100 - 225 psi
Water Flow
:
800 - 1500 l/min
Effective Spray Width (Diameter)
:
100 - 120 m
Total Irrigated Area
:
555 X 770 m = 427,350 m² (42 Hectare) in 7 days
Sprinkler
:
DuCaR JET 200 or Sime Reflex
Weight
:
4700 kg
Driven by
:
7 HP Hatz Diesel Single Cylinder Engine with electric ignition
Mechanism
:
Hydraulic Gear Box
Rewind Speed & Length Control
:
Hydro Computer 260
Call for pricing

CASELLA Hard Hose Irrigator LL 120/500 (7 HP Diesel-Engine Driven Hose Reel)

Applications

Agriculture: Large crops, pastures and dairy farms

This higly efficient hard hose irrigator is operated by a small 7 HP diesel engine. So, it does not require ANY water flow and pressure to operate the machine. The fuel consumption of the motor is around 0.5 liter per hour and you can run the machine up to 60 hours with one full tank. It is perfect for irrigation applications with very low flow rate and pressure. Except the friction loss along the 500 m hose on the machine, there will be NO pressure loss in between the gun and water inlet of the machine.

FEATURES

  • Heavy duty design
  • Hot dip galvanised trolley
  • Travel shut-off mechanism
  • High efficient turbine 
  • Italian made hydraulic gear box: Controlled by the computer system, powered by the atached diesel engine.
  • Sensitive speed control
  • Hatz 7 HP Diesel single cylinder engine with electric ignition for hose recovery
  • Diesel engine powered computer Hydro-Control 260 with Start/Stop, Speed Control, Pause at the begining/end of the run functionalities
  • Hydraulic pump
  • Hydraulic rotation of upper frame (360°)
  • Hydraulic control of left, right wheels (individually) and front lifter to the ground
  • Hydraulic lift for sprinkler trolley
  • Trolley with 2 Iron Wheels
  • 4 m Flexible hose for water inlet
  • Tyres : 13.0 / 65-18
  • Automatic Greasing System
  • Sensor to stop engine in case of no water flow
  • Discharge valve kit (Butterfly valve)
  • Water Flow : 1500 l/min
  • Hydraulic rear stabilizers.
  • Hydraulic power drawbar. 
  • Special design differentiated thickness polyethylene hose
  • Comes with Ducar JET 200 or Sime Reflex Sprinkler Head
  • Excellent Water Uniformity
  • Long Life & Simple Maintenance : The units are built from long life components and require a minimum of maintenance. Spare parts and backup service available.
  • Easy and safe operation
  • Very low labour requirement : The Cassella LLS model irrigator can easily be operated by one man and the labour consists mostly of driving a tractor.
  • Made in Italy

 

 Download Casella Quality Comperison Document

 

HYDRAULIC INSTALLATION

Composed of: servo-drawbar front jack (only for LT-LLT-LLTS mod). Jacks allowing lowering the wheels for the carriage position or lifting them for the working position by leaning the machine on a turning step which allows for 360° rotation only for LT-LLT-LLTS mod). Jacks on rear stabilizers securing the machine to the ground in the working position and turning into lifting elements for the sprinkler trolley during the carriage phase. The platform lowering during the working phase ensures the machine a good stability thus allowing the mounting of long hoses on mod. LT-LLT-LLTS mod. Oversized stabilizer jacks as well as step hydraulic rotation are also available as optional accessories.

LLS-120-500-hydraulic-control-panel
/LLS_120-500-Hydro-Jet

IDEAL SYSTEM FOR EFFECTIVE ENERGY SAVING

This type of machine exploits a small diesel engine for both hose recovery and hydraulic controls. The main advantage of this system is that it does not absorb water power which can hence be completely used for irrigation. The pressure losses of the machine are thus reduced by 25-30% with an average fuel consumption of the diesel engine of 300gr/h. Such solution makes this system suitable for the mounting of hoses having large diameter and remarkable length (up to 700 m). Moreover, it is the only system allowing spreading of manures or waste waters at high recovery speeds (10 to 150m/h).

BUILT-IN HYDRAULIC SYSTEM

Performing as:
- Hose recovery speed adjuster (10 to 150m/h). Max speed of 200-300-2000 m/h on demand.
- Recovery speed mechanic-hydraulic compensator.
- Lever for the control of hose recovery - stop - reverse rotation.
- Automatic stop in case of end of working and wrong hose rewinding.
- Automatic protection against PE hose breaking by a valve calibrated to the maximum allowable strain with regard to the PE hose mounted on the machine.

LLS_120-500-Hydrolic system
LLS_120-500-Control-Panel

HYDRO-CONTROL 260

- Length of unwound hose up to 1000 meters
- Initial pause 0 to 99 min.
- Hose re-winding control 5 to 999 m/h
- Final pause 0 to 99 min.
- End of irrigation
- Automatic calculation of speed by programming the irrigation time. 

During irrigation the back-lit display shows: irrigator recovery speed in m/h, remaining length to be rewound, remaining time to the end of irrigation.

SENSOR FOR HOSE RECOVERY SPEED MEASUREMENT

The ELECTRONIC COMPENSATION system keeps the recovery speed constant irrespective of winding diameter and hose traction force. When the desired speed is selected the electronic compensation system detects - by a rear sensor (A) - the hose recovery actual speed and by acting on the hydraulic control valve (B) corrects automatically the recovery speed to the selected value.

LLS_120-500-Hose-Recovery-Sensor
LLS_120-500-Discharge-Valve

DISCHARGE VALVE
Device allowing discharging a great amount of water at the end of the working phase so as to decrease line pressure to be used to stop the pumping station.

LLS_120-500-Water-Inlet

WATER INLET
Special care has been devoted to the design of water inlet by means of large diameter pipes and wide radius elbows to prevent any pressure loss.

LLS_120-500-Standard-Trolley

Trolley with 2 iron wheels

LLS_120-500-Dscharge-vacuum-pump

DISCHARGE VACUUM PUMP
Device allowing the quick discharge of the water inside the hose at the end of the working phase to enable carriage and favour the hose unwinding.

LLS_120-500-Hydraulic-System-3
LLS_120-500-Engine-Stop

ENGINE STOP
Device allowing stopping the diesel engine and the hose recovery in case of water supply stop (optional).

LLS_120-500-Water-Inlet-2

WATER INLET ON 2 SIDES
Pipe to feed water on 2 sides of the machine thus enabling easy connection to the hose.

Casella label
LLS_120-500-Differentiated-Pipe

 

CASELLA LLS 120/500 Diesel Engin Driven Hard Hose Irrigator

Technical Specifications for DuCaR JET 200 Sprinkler Head

Nozzle Diameter Pressure Jet Length Capacity Values for a single sprinkler
Irrigated Area Rainfall per hour
mminchatmpsimfeetl/minm3/hG.P.Mm2acremm/h
25 1 3 44 41 134 720 43,2 190 5278 1,30 8,2
25 1 4 56 44 144 805 48,3 213 6079 1,50 7,9
25 1 5 70 48 157 917 55 242 7235 1,79 7,6
28 1,10 4 56 50 164 1050 63 277 7850 1,94 8,0
28 1,10 5 70 52 171 1200 72 317 8491 2,10 8,5
28 1,10 6 85 56 184 1300 78 343 9847 2,43 7,9
30 1,18 4 56 51 167 1220 73,2 322 8167 2,02 9,0
30 1,18 5 70 56 184 1383 83 365 9847 2,43 8,4
30 1,18 6 85 57 187 1488 89,3 393 10202 2,52 8,8
32 1,25 4 56 52 171 1383 83 365 8491 2,10 9,8
32 1,25 5 70 56 184 1550 93 409 9847 2,43 9,4
32 1,25 6 85 60 197 1733 104 458 11304 2,79 9,2
32 1,25 7 100 64 210 1850 111 489 12861 3,18 8,6
34 1,33 5 70 58 190 1750 105 462 10563 2,61 9,9
34 1,33 6 85 62 203 1950 117 515 12070 2,98 9,7
34 1,33 7 100 66 216 2033 122 537 13678 3,38 8,9
36 1,42 6 85 65 213 2117 127 559 13267 3,28 9,6
36 1,42 7 100 68 223 2253 135 595 14519 3,59 9,3
36 1,41 8 114 71 233 2435 146 643 15829 3,91 9,2
38 1,5 6 85 67 220 2317 139 612 14095 3,48 9,9
38 1,5 7 100 70 230 2483 149 656 15386 3,80 9,7
38 1,5 8 114 72 236 2683 161 709 16278 4,02 9,9
40 1,57 6 85 68 223 2600 156 687 14519 3,59 10,7
40 1,57 7 100 73 239 2700 162 713 16733 4,13 9,7
40 1,57 8 114 76 249 2950 177 779 18137 4,48 9,8
42 1,65 6 85 70 230 2800 168 740 15386 3,80 10,9
42 1,65 7 100 75 246 3000 180 793 17663 4,36 10,2
42 1,65 8 114 79 259 3150 189 832 19597 4,84 9,6
42 1,65 9 114 84 276 3350 201 885 22156 5,47 9,1

CASELLA Hard Hose Irrigator LL 120/500 (7 HP Diesel-Engine Driven Hose Reel)

Applications

Agriculture: Large crops, pastures and dairy farms

This higly efficient hard hose irrigator is operated by a small 7 HP diesel engine. So, it does not require ANY water flow and pressure to operate the machine. The fuel consumption of the motor is around 0.5 liter per hour and you can run the machine up to 60 hours with one full tank. It is perfect for irrigation applications with very low flow rate and pressure. Except the friction loss along the 500 m hose on the machine, there will be NO pressure loss in between the gun and water inlet of the machine.

FEATURES

  • Heavy duty design
  • Hot dip galvanised trolley
  • Travel shut-off mechanism
  • High efficient turbine 
  • Italian made hydraulic gear box: Controlled by the computer system, powered by the atached diesel engine.
  • Sensitive speed control
  • Hatz 7 HP Diesel single cylinder engine with electric ignition for hose recovery
  • Diesel engine powered computer Hydro-Control 260 with Start/Stop, Speed Control, Pause at the begining/end of the run functionalities
  • Hydraulic pump
  • Hydraulic rotation of upper frame (360°)
  • Hydraulic control of left, right wheels (individually) and front lifter to the ground
  • Hydraulic lift for sprinkler trolley
  • Trolley with 2 Iron Wheels
  • 4 m Flexible hose for water inlet
  • Tyres : 13.0 / 65-18
  • Automatic Greasing System
  • Sensor to stop engine in case of no water flow
  • Discharge valve kit (Butterfly valve)
  • Water Flow : 1500 l/min
  • Hydraulic rear stabilizers.
  • Hydraulic power drawbar. 
  • Special design differentiated thickness polyethylene hose
  • Comes with Ducar JET 200 or Sime Reflex Sprinkler Head
  • Excellent Water Uniformity
  • Long Life & Simple Maintenance : The units are built from long life components and require a minimum of maintenance. Spare parts and backup service available.
  • Easy and safe operation
  • Very low labour requirement : The Cassella LLS model irrigator can easily be operated by one man and the labour consists mostly of driving a tractor.
  • Made in Italy

 

 Download Casella Quality Comperison Document

 

HYDRAULIC INSTALLATION

Composed of: servo-drawbar front jack (only for LT-LLT-LLTS mod). Jacks allowing lowering the wheels for the carriage position or lifting them for the working position by leaning the machine on a turning step which allows for 360° rotation only for LT-LLT-LLTS mod). Jacks on rear stabilizers securing the machine to the ground in the working position and turning into lifting elements for the sprinkler trolley during the carriage phase. The platform lowering during the working phase ensures the machine a good stability thus allowing the mounting of long hoses on mod. LT-LLT-LLTS mod. Oversized stabilizer jacks as well as step hydraulic rotation are also available as optional accessories.

LLS-120-500-hydraulic-control-panel
/LLS_120-500-Hydro-Jet

IDEAL SYSTEM FOR EFFECTIVE ENERGY SAVING

This type of machine exploits a small diesel engine for both hose recovery and hydraulic controls. The main advantage of this system is that it does not absorb water power which can hence be completely used for irrigation. The pressure losses of the machine are thus reduced by 25-30% with an average fuel consumption of the diesel engine of 300gr/h. Such solution makes this system suitable for the mounting of hoses having large diameter and remarkable length (up to 700 m). Moreover, it is the only system allowing spreading of manures or waste waters at high recovery speeds (10 to 150m/h).

BUILT-IN HYDRAULIC SYSTEM

Performing as:
- Hose recovery speed adjuster (10 to 150m/h). Max speed of 200-300-2000 m/h on demand.
- Recovery speed mechanic-hydraulic compensator.
- Lever for the control of hose recovery - stop - reverse rotation.
- Automatic stop in case of end of working and wrong hose rewinding.
- Automatic protection against PE hose breaking by a valve calibrated to the maximum allowable strain with regard to the PE hose mounted on the machine.

LLS_120-500-Hydrolic system
LLS_120-500-Control-Panel

HYDRO-CONTROL 260

- Length of unwound hose up to 1000 meters
- Initial pause 0 to 99 min.
- Hose re-winding control 5 to 999 m/h
- Final pause 0 to 99 min.
- End of irrigation
- Automatic calculation of speed by programming the irrigation time. 

During irrigation the back-lit display shows: irrigator recovery speed in m/h, remaining length to be rewound, remaining time to the end of irrigation.

SENSOR FOR HOSE RECOVERY SPEED MEASUREMENT

The ELECTRONIC COMPENSATION system keeps the recovery speed constant irrespective of winding diameter and hose traction force. When the desired speed is selected the electronic compensation system detects - by a rear sensor (A) - the hose recovery actual speed and by acting on the hydraulic control valve (B) corrects automatically the recovery speed to the selected value.

LLS_120-500-Hose-Recovery-Sensor
LLS_120-500-Discharge-Valve

DISCHARGE VALVE
Device allowing discharging a great amount of water at the end of the working phase so as to decrease line pressure to be used to stop the pumping station.

LLS_120-500-Water-Inlet

WATER INLET
Special care has been devoted to the design of water inlet by means of large diameter pipes and wide radius elbows to prevent any pressure loss.

LLS_120-500-Standard-Trolley

Trolley with 2 iron wheels

LLS_120-500-Dscharge-vacuum-pump

DISCHARGE VACUUM PUMP
Device allowing the quick discharge of the water inside the hose at the end of the working phase to enable carriage and favour the hose unwinding.

LLS_120-500-Hydraulic-System-3
LLS_120-500-Engine-Stop

ENGINE STOP
Device allowing stopping the diesel engine and the hose recovery in case of water supply stop (optional).

LLS_120-500-Water-Inlet-2

WATER INLET ON 2 SIDES
Pipe to feed water on 2 sides of the machine thus enabling easy connection to the hose.

Casella label
LLS_120-500-Differentiated-Pipe

 

CASELLA LLS 120/500 Diesel Engin Driven Hard Hose Irrigator

Technical Specifications for DuCaR JET 200 Sprinkler Head

Nozzle Diameter Pressure Jet Length Capacity Values for a single sprinkler
Irrigated Area Rainfall per hour
mminchatmpsimfeetl/minm3/hG.P.Mm2acremm/h
25 1 3 44 41 134 720 43,2 190 5278 1,30 8,2
25 1 4 56 44 144 805 48,3 213 6079 1,50 7,9
25 1 5 70 48 157 917 55 242 7235 1,79 7,6
28 1,10 4 56 50 164 1050 63 277 7850 1,94 8,0
28 1,10 5 70 52 171 1200 72 317 8491 2,10 8,5
28 1,10 6 85 56 184 1300 78 343 9847 2,43 7,9
30 1,18 4 56 51 167 1220 73,2 322 8167 2,02 9,0
30 1,18 5 70 56 184 1383 83 365 9847 2,43 8,4
30 1,18 6 85 57 187 1488 89,3 393 10202 2,52 8,8
32 1,25 4 56 52 171 1383 83 365 8491 2,10 9,8
32 1,25 5 70 56 184 1550 93 409 9847 2,43 9,4
32 1,25 6 85 60 197 1733 104 458 11304 2,79 9,2
32 1,25 7 100 64 210 1850 111 489 12861 3,18 8,6
34 1,33 5 70 58 190 1750 105 462 10563 2,61 9,9
34 1,33 6 85 62 203 1950 117 515 12070 2,98 9,7
34 1,33 7 100 66 216 2033 122 537 13678 3,38 8,9
36 1,42 6 85 65 213 2117 127 559 13267 3,28 9,6
36 1,42 7 100 68 223 2253 135 595 14519 3,59 9,3
36 1,41 8 114 71 233 2435 146 643 15829 3,91 9,2
38 1,5 6 85 67 220 2317 139 612 14095 3,48 9,9
38 1,5 7 100 70 230 2483 149 656 15386 3,80 9,7
38 1,5 8 114 72 236 2683 161 709 16278 4,02 9,9
40 1,57 6 85 68 223 2600 156 687 14519 3,59 10,7
40 1,57 7 100 73 239 2700 162 713 16733 4,13 9,7
40 1,57 8 114 76 249 2950 177 779 18137 4,48 9,8
42 1,65 6 85 70 230 2800 168 740 15386 3,80 10,9
42 1,65 7 100 75 246 3000 180 793 17663 4,36 10,2
42 1,65 8 114 79 259 3150 189 832 19597 4,84 9,6
42 1,65 9 114 84 276 3350 201 885 22156 5,47 9,1
Write your own review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

Casella Macchine Agricole

Casella Irrigation hose reels and beyond

Since 1954 Casella Macchine Agricole has paid attention to quality and service.

Casella’s main production regards irrigation systems. Casella enitrely designs and produces: hose reels for sprinkler irrigation, hose reels with engine or turbine rewinding, hose reels with integrated motorpump, hose reels driven by satellite/drone maps, motorpumps for water irrigation or slurry/manure distribution, pumps for water irrigation and slurry/manure, underground pipe lines for slurry/manure/sewage/Biogas products  distribution with ripper.

Benchmark in irrigation, Casella is also a leader in vrt (variable rate technology) with fertilizers spreaders for corn, tomatoes, field-crops and vines and special sensors for vegetation idex and environment analysis maps. Thanks to 100 employees, the production includes compactor rolls and wagons. A huge spare parts warehouse, an area of 75.000 sq.mt. and a timely after-sales service complete Casella’s offer to the world of agriculture.

CASELLA aims at developing and increasing the use of hard hose travelling irrigators through excellence and professionalism recognized by our customers who work with us throughout the world. We invest in research of new and improved applications to optimize technological improvements with the objective to increase agricultural production while reducing input costs. The QUALITY CONTROL SYSTEM according to the UNI EN ISO 9001:2008 standard is the key instrument to pursue CASELLA's objective to maintain the leader position it holds in the irrigation industry in the short, mid and long term. 

 

casella made in italy
casella-factory-1

*
*
*

These irrigation calculators will help compute your irrigation needs based on your growing practices, types of soil, and vegetation.

Popular Calculators

Irrigation Management Calculators

  • Irrigation Frequency: maximum interval allowed between irrigations. This is dependent on soil type, root zone depth, and the water use rate of the crop.
  • Set Irrigation Times: set time required to fulfill a given water application, irrigation area, and flow rate.
  • Water Depth: Depth of water applied to a specified area over the specified time span based on the given flow rate.
  • Water Application Rate: Application rate using the flow rate on an area.

Drip Irrigation Calculators

Sprinkler Irrigation Calculators

Center Pivot Irrigation Calculators

Residential Irrigation Calculators

General Design Calculators